Does Boiling Kill Mold? Facts and Removal Guide

If you’re worried about mold in your home, you may be wondering what temperature will kill it. Here’s a look at the various ways to get rid of mold and the temperatures necessary to do so.

Related Post: Latest & Best Air Purifiers

Related Post: Best Air Purifier for 1000 Square Feet

Related Post: Does Sunlight Kill Mold?

Does Boiling Kill Mold?

Does Boiling Kill Mold?

Mold is a fungus that can grow anywhere with moisture and organic material. It can cause health problems in people with allergies, asthma, or other respiratory conditions. Often, the only way to get rid of mold is to remove the affected materials and clean the area thoroughly. But does boiling water kill mold? The answer may surprise you.

Mold spores are tiny, and they can survive even after boiling water has been poured on them. In fact, some molds are resistant to high temperatures and will not be killed by boiling water. So if you have a colony of mold growing somewhere in your home, pouring boiling water on it will not get rid of it. You’ll need to take more drastic steps to remove the affected materials and clean the area thoroughly.

You can, however, use boiling water to kill mold on hard surfaces. Just make sure to scrub the surface afterward to remove any mold spores that may be left behind. And, of course, always take proper safety precautions when handling hot water.

How To Use Boiling Water To Kill Mold? Step By Step Guide

The high temperature of the water can help to destroy the mold spores, preventing them from spreading and growing. However, it is important to note that not all mold can be killed by boiling water. Some types of fungus can survive at high temperatures, so it is essential to consult a professional before attempting this method.

In addition, care should be taken when using hot water, as it can pose a safety hazard. The best way to use boiling water to kill mold is to bring the water to a boil. Then, pour the hot water over the affected area and let it sit for at least five minutes. After that, scrub the area with a brush or sponge to remove any remaining mold spores.

Finally, rinse the area with clean water. You can effectively kill mold, including black mold, and keep your home safe and healthy by following these steps.

Are Molds Killed By Heat?

Mold growth is often seen as a problem in hot, humid climates. However, mold spores are killed by hot temperatures. Most molds cannot survive at temperatures above 140 degrees Fahrenheit. In addition, molds thrive in warm, damp environments. Building materials exposed to hot temperatures are less likely to be damaged by mold.

As a result, hot weather can actually help to prevent mold growth. While most molds can be effectively controlled with hot temperatures, it is important to know which ones are thermotolerant to select the best treatment method properly.

Does Heat Make Mold Worse?

Many people believe that heat can kill mold and prevent it from growing. However, this is only true if the temperature is high enough to kill the spores. Once the spores are dead, they can no longer reproduce. However, heat will only kill mold temporarily. As soon as the temperature drops and moisture is reintroduced, the mold will start to grow again. In addition, heat can make mold worse by drying out the air and making it easier for the mold to spread.

At What Temperature Is Mold Killed?

Most yeasts and molds are heat-sensitive and will be killed at temperatures of 140-160°F (60-71°C). However, a few are resistant to heat and can survive at these temperatures. One example is black mold, which can produce spores resistant to high temperatures.

To kill all the mold spores, it is necessary to raise the temperature to 140-160°F (60-71°C) and maintain this temperature for at least three minutes. At this temperature, the mold spores will be killed, and the mold will no longer be able to grow.

Does Cold Temperature Kill Mold?

While it is true that cold temperatures can deactivate mold spores, it is important to understand that this does not mean that the problem has been solved. Once the temperature rises again, the mold spores will become active and multiply once more. In addition, below freezing temperatures will only kill the mold that is visible. The mold roots will remain dormant and will begin to grow again as soon as the temperature rises.

As a result, simply lowering the temperature will not solve a mold problem. To rid your home of mold, you need to take proactive steps to prevent it from taking hold in the first place.

How To Get Rid Of Mold Other Than Using Boiling Or Hot Water?

Though boiling or hot water can kill mold, there are many other ways to get rid of it that doesn’t require reaching for the kettle.

Baking soda is a natural air purifier and can also be used to kill mold. Simply mix 1/2 cup baking soda with 1/2 cup water and 2 tablespoons of bleach. Apply the mixture to the affected area with a brush and leave for an hour before wiping away.

You can also use vinegar to kill mold. Simply mix 1 part vinegar to 1 part water and apply it to the moldy area with a cloth. Leave for an hour before wiping away.

If you’re looking for a more natural solution, try using an air purifier. Air purifiers help to remove mold spores from the air, preventing them from taking hold and growing.


So, does boiling kill mold? The answer is yes, but it’s not as simple as just boiling water. You need to make sure the water is hot enough and let the pot boil for at least 10 minutes. And if there are any remaining signs of mold after you’ve boiled the item, be sure to clean them with a bleach solution. While boiling or hot water can kill mold, many other effective methods can be used to get rid of it. Baking soda, vinegar, and air purifiers effectively kill mold and prevent it from growing. With the right approach, you